What is a temporary power pole used for?
A temporary power pole, sometimes called a construction pole or temp pole, feeds tools, lighting and trailers on a job site before the utility connects permanent power. Contractors set one at the start of a build and the utility company energizes it once the site passes inspection, often at the same time they book portable restroom rental for the crew. Henderson Porta Pros arranges the pole itself; wiring and inspection go through the utility and the local building department. Most sites pair the pole with a light tower rental for early morning and after-dark work, and some add a mobile office trailer rental that draws off the same panel. If your project sits near Whitney, about 9.5 miles north of central Henderson, or out toward Enterprise, 13.8 miles west, plan the pole order early since utility scheduling can run longer than the rest of the site setup.
How does temporary power pole installation work?
Installation starts with a site visit to confirm panel size, mounting location and clearance from the building footprint. A 200 amp temporary power pole is the common choice for mid-size construction projects, sized to run saws, compressors and a few light tower rental units without tripping breakers. Henderson Porta Pros sets the pole, then the electrician makes final connections and the utility schedules the energize date, a sequence covered in more depth on our porta potty placement guide for sites juggling several deliveries at once. OSHA 1926.404(b)(1)(ii) requires ground fault circuit interrupter protection on construction sites, so the panel and any temporary circuits need GFCI coverage before crews plug in tools. Keep the approach clear: a nearby roll-off dumpster rental or a 10 yard dumpster rental staged too close to the pole location can force a re-set, and OSHA 1926.25 calls for keeping work areas clear of scrap and debris anyway. Placement also affects your temporary fence rental layout, since the panel usually needs to sit inside the secured perimeter, not outside a chain link temporary fence line.
What does temporary power pole installation cost, and what do I need to provide?
Temporary power pole pricing depends on amperage, mounting height and how far the utility has to run service to reach the pole, so get a site-specific quote rather than assume a flat number; our temporary fence cost and dumpster rental cost pages show how the same logic plays out for other site equipment. What you can budget elsewhere on the same site is more predictable. Below are current ranges for services Henderson Porta Pros installs alongside a temp pole, and the porta potty rental cost page breaks the restroom line down further.
| item | duration | typical price |
|---|---|---|
| standard portable toilet | week | $200 |
| standard portable toilet | month | $200 |
| 10 yard dumpster | week | $600 |
| storage container | month | $125 |
| temporary fence | day | $50 |
Confirming placement in the public right of way still needs a call to the city, since exact permit rules were not verified for this page. A request a quote covers pole scheduling alongside restrooms, dumpsters and fencing in one pass, and our porta potty rental checklist walks through what a new site typically forgets; the dumpster permit requirements page is worth a look too, since permit questions tend to arrive together. Crews commuting from Winchester, 15.5 miles northwest, often bundle everything into one delivery run to save a trip.
How long does it take to get a temporary power pole installed?
Timeline depends on utility scheduling more than the pole itself, and that step is the long pole in the tent, similar to how emergency septic service response time hinges on factors outside our control. Order it as soon as you have a site address. Henderson Porta Pros can typically deliver and mount the pole within days once the site is graded and accessible, but energizing depends on the utility's queue.
Do I need a permit for a temporary power pole in Henderson?
Likely yes, but the exact requirement needs confirming with the city since it was not verified for this page, much like the open questions covered on our porta potty permit requirements page. Your electrician or Henderson Porta Pros can point you to the right department before the pole goes in, so you're not guessing on inspection day.
What size temporary power pole do I need for a construction site?
Most mid-size construction sites in Henderson run a 200 amp temporary power pole rental comfortably. Larger sites running multiple trailers, several light tower rental units, a restroom trailer rental or two, and heavy equipment chargers at once may need higher amperage; a site visit settles the right size fast.
Can a temporary power pole share space with my portable restrooms and fencing?
Yes, and most sites plan it that way. Henderson Porta Pros lays out the pole, portable toilet rental units and crowd control barrier rental or fence line together during the first site visit, so nothing blocks truck access later.
Does the power pole need its own electrical inspection?
Yes. The utility will not energize a temporary power pole until the wiring passes inspection, separate from any final building inspection. Your electrician schedules that step; Henderson Porta Pros handles the pole and site logistics around it, including coordinating with an emergency porta potty rental if the schedule shifts.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.